Skip to main content
A person in a blue shirt installing electrical wiring in pink fiberglass wall insulation
Insulation

Insulation Blow: Blown-In Insulation Guide for Ontario

Reviewed by Fadi Mamar, Co-founder

Insulation blow, more commonly called blown-in insulation, is loose-fill material that a machine shoots through a hose into attics, wall cavities, and floor spaces. The method reaches gaps, irregular framing, and tight corners that rigid or batt products leave behind, and it is the most common way Ontario homeowners bring an under-insulated attic up to current standards. This guide covers the materials, R-values, code targets, process, and Toronto pricing you need before you book a contractor.

What Is Insulation Blow and How Does It Work?

A blowing machine holds bags of loose insulation in a hopper, breaks the material apart, and pushes it through a long flexible hose with a stream of air. The installer or a helper directs the hose across the attic floor or into drilled wall cavities, and the material settles into a continuous blanket with no seams. Two methods cover most jobs: loose-fill blowing in open attics and dense-pack blowing in enclosed cavities.

In an open attic, the crew spreads material across the ceiling joists to a target depth, usually 16 to 24 inches. In existing walls, the crew drills a small hole near the top of each stud bay, inserts a fill tube, and packs the cavity to a density that resists settling. Our guide to blown-in insulation in Toronto covers how this fits into a full retrofit.

Loose-Fill vs Dense-Pack

  • Loose-fill: installed at low density in open attics, typically 1.5 to 2.0 lb/ft³ for cellulose, with an R-value near 3.5 per inch.
  • Dense-pack: installed at 3.5 to 4.0 lb/ft³ in closed wall cavities, which limits settling and slows air movement through the wall.
  • Damp-spray cellulose: mixed with a small amount of water so it adheres to open stud bays before drywall goes on, common in new construction.

Blown-In Insulation Materials: Cellulose, Fibreglass and Mineral Wool

Three materials dominate the Ontario market. Each performs differently on R-value, moisture tolerance, and cost, so the right pick depends on where the insulation goes.

  • Cellulose: made from recycled newsprint treated with borate for fire and pest resistance. R-value of about 3.5 per inch, the densest option, and the best performer at blocking air movement.
  • Blown fibreglass: spun glass fibres in loose form. R-value of about 2.5 to 3.0 per inch depending on density. It resists moisture well and does not absorb water, but it is lighter and allows more air movement.
  • Blown mineral wool: made from basalt rock or slag. R-value of about 3.0 to 3.3 per inch, with a melting point above 1,000°C, which makes it the strongest choice where fire resistance matters.

Cellulose wins on price and air-blocking. Fibreglass suits homeowners worried about damp attics. Mineral wool carries a premium but adds fire protection and sound control. For a closer look at one mineral wool brand, see our breakdown of Roxul products and their Ontario costs.

Loose-fill insulation settles over time. Cellulose settles 15 to 20 percent, so installers blow it deeper than the labelled depth to reach the target R-value after settling.

Ontario Building Code Requirements for Blown-In Insulation

The Ontario Building Code sets minimum effective thermal resistance by climate zone, and most of the GTA sits in Zone 6. For attics, the prescriptive path under OBC SB-12 calls for R-60 in new construction, and many energy programs ask for the same target when you upgrade an existing attic. Above-grade walls call for roughly R-22 to R-24 in new builds, but existing walls only need what the cavity depth allows.

Hitting R-60 with blown-in cellulose takes about 17 inches of settled depth. Blown fibreglass at R-2.7 per inch needs closer to 22 inches. That depth difference matters in older Toronto homes where the attic rafters and ceiling joists leave limited clearance near the eaves.

Baffles, Ventilation and Air Sealing

Blown-in insulation covers vents unless the crew installs baffles first. Attic ventilation needs roughly 1 square foot of net free vent area per 300 square feet of ceiling, split between soffit intake and ridge or gable exhaust. Blocking soffit vents causes moisture buildup and contributes to the ice dams covered in our post on how proper insulation prevents ice dams.

Air sealing comes before any insulation goes in. Pot lights, plumbing stacks, wiring penetrations, and the attic hatch leak warm air into the attic, and loose-fill does not stop that air movement. The crew seals those gaps with caulk, spray foam, or rigid board before blowing material in.

How a Professional Blow-In Insulation Job Goes

  1. Step 1: Inspect the attic for moisture, mould, knob-and-tube wiring, vermiculite, and roof leaks. Any of these must be dealt with before insulating.
  2. Step 2: Air seal the ceiling plane, including pot light housings, wire holes, plumbing penetrations, and the attic access.
  3. Step 3: Install ventilation baffles at every soffit bay so insulation cannot block airflow.
  4. Step 4: Build a dam or install rigid board around the attic hatch and any chimneys or flues to hold insulation back from heat sources.
  5. Step 5: Install depth markers every 100 square feet so the crew and the homeowner can verify the final depth.
  6. Step 6: Blow the insulation to the target depth, working from the far corners back toward the hatch.
  7. Step 7: Check the final depth against the markers, photograph the result, and confirm the coverage rating from the bag label.

A typical 1,000 square foot attic takes a two-person crew three to five hours. Wall dense-pack takes longer because each stud bay needs drilling, filling, and patching.

Blown-In Insulation Cost in Toronto and the GTA

Pricing in the GTA depends on material, depth, attic access, and how much air sealing the job needs. Current ranges for professional installation:

  • Attic top-up to R-50 or R-60: $1.75 to $3.25 per square foot installed, or $2,500 to $4,500 for a typical 1,200 square foot attic.
  • Full attic strip and reinsulate: $4,500 to $8,000, which adds old material removal and extra air sealing.
  • Dense-pack walls: $2.50 to $4.50 per square foot of wall area, or $5,000 to $10,000 for a full semi-detached retrofit.
  • Air sealing add-on: $500 to $1,500 depending on the number of penetrations.

Natural Resources Canada and Enbridge programs have offered rebates for attic upgrades, which can offset $1,000 to $5,000 of the work depending on your starting R-value. Check current program rules before signing a contract, because eligibility often requires a pre-retrofit energy audit. Our Ontario insulation rebates guide lists what has been available.

Ask every bidder for the bag count and coverage chart for your attic. A legitimate quote lists the material, the installed R-value, the settled depth, and the number of bags used.

Common Blow-In Insulation Mistakes to Avoid

  • Skipping air sealing. Loose-fill slows heat flow but does not stop air leaks. Unsealed pot lights and wire holes undo much of the R-value gain.
  • Blocking soffit vents. Without baffles, insulation spills over the eaves, and moisture has nowhere to go.
  • Insulating over problems. Roof leaks, bathroom fans venting into the attic, and mould all need repair first.
  • Compressing the material. Stepping or storing items on loose-fill reduces its R-value. Build a raised walkway if you need attic access.
  • Leaving the hatch uninsulated. An uninsulated attic hatch lets warm air escape into the attic and cancels out the work done around it.

Is Blown-In Insulation Safe Around Old Wiring?

Knob-and-tube wiring cannot be buried in insulation. Many insurers will not cover a home with insulated knob-and-tube circuits, and the fire risk is real. A licensed electrician must replace the wiring before the insulation crew starts. Vermiculite insulation in older attics may contain asbestos and needs testing and professional abatement before any work.

Work With a Contractor Who Does the Prep

Konstruction Group installs blown-in insulation across the GTA, along with attic insulation upgrades and batt insulation for open framing, and each job starts with air sealing, baffles, and depth markers so the finished R-value matches the quote.

Frequently Asked Questions

Do you need a vapour barrier with blown-in insulation?

In Ontario, the Building Code requires a vapour barrier on the warm side of insulated walls and ceilings in heated homes. In attics with blown-in insulation, an existing polyethylene sheet or vapour-retarder paint on the ceiling drywall usually meets this requirement. Blown-in insulation does not replace a vapour barrier, so confirm the existing layer is intact before you add more material.

Does Home Depot sell AttiCat insulation?

Home Depot does not carry AttiCat as a retail product. Owens Corning's AttiCat system is sold through certified insulation contractors, who install it with specialized blowing machines. Home Depot Canada does sell other loose-fill products and rents blowing machines for DIY projects.

How much does it cost to insulate a 2000 sq ft house?

In the GTA, insulating a 2,000 sq ft house typically costs $3,000 to $8,000 for an attic top-up to R-60, depending on existing insulation and access. Full-house work that includes walls and basement can run $10,000 to $25,000 or more. Spray foam costs roughly two to three times more than blown-in fibreglass or cellulose.

Can mould grow on wool insulation?

Wool insulation resists mould better than many materials because it absorbs and releases moisture without losing insulating value. Mould can still grow if the wool stays wet for long periods, such as after a roof leak or from condensation caused by poor ventilation. Fix moisture sources first and keep attic ventilation clear.

Do mice nest in rockwool?

Mice generally avoid rockwool because the dense, fibrous, mineral-based material is abrasive and gives them little to chew or shred for nesting. They can still tunnel through gaps or burrow into batts that have shifted. Sealing entry points at the foundation, soffits, and roofline is the most reliable way to keep mice out.

Sources & Methodology

Konstruction Group verified this guide's claims against the Ontario Building Code (SB-12 prescriptive R-values), Natural Resources Canada insulation guidance, manufacturer coverage charts for cellulose, fibreglass, and mineral wool, and building science ventilation guidance. Toronto pricing ranges reflect recent GTA project quotes and installed-cost data from our own insulation work. Rebate details should be confirmed against current program rules before contracting.

Fadi Mamar, Co-founder of Konstruction Group Inc

Written & reviewed by

Fadi Mamar

Co-founder, Konstruction Group Inc

Engineering graduate from Toronto Metropolitan University with 14+ years in Toronto construction. Has overseen 500+ residential and commercial framing, insulation, and drywall projects across the GTA.

LinkedIn Profile

Ready to Start Your Project?

Contact Konstruction Group for a free consultation and quote.

Get a Free Quote