
Drywall Contractor Etobicoke
Professional drywall contractor services in Etobicoke and City of Toronto. Licensed, insured, free estimates.
Professional Drywall Contractor in Etobicoke
Last updated:
Etobicoke's construction market spans waterfront condo towers in Mimico and Long Branch, luxury renovations in The Kingsway, and basement finishing across Markland Wood and Rexdale. Konstruction Group provides complete drywall installation, taping, and finishing to Level 4, plus framing and insulation for projects that need the full structural trade package.
Drywall Services We Provide
- Complete Drywall Installation – Full boarding of walls and ceilings for new townhomes, condos, custom builds, and major renovations
- Fire-Rated Assemblies – Type X and double-layer assemblies for party walls between townhouse units, demising walls, and code-required separations
- Taping & Finishing – Three-coat compound system with sanding between coats for a smooth, Level 4 paint-ready surface
- Renovation Drywall – Demolition, repair, and new drywall installation integrated seamlessly with existing finishes
- Basement Drywall – Moisture-resistant and mold-resistant boarding for below-grade spaces, including legal basement apartments
- Specialty Boards – Application-specific drywall including moisture-resistant, mold-resistant, and abuse-resistant products
- Ceiling Installation – Flat ceilings, soffits, bulkheads, tray ceilings, and pot-light framing for residential and commercial projects
- T-Bar & Suspended Ceilings – Grid ceiling systems for basements, retail spaces, and commercial interiors needing accessible mechanical access
Etobicoke's Waterfront Transformation and Renovation Market
Etobicoke's construction landscape is defined by two distinct markets. Along the waterfront, the Mimico-Long Branch corridor is undergoing a major residential transformation — new condo towers, stacked townhouses, and infill developments are replacing older low-rise buildings. These projects require high-volume drywall with fire-rated party walls and fast production schedules. Inland, neighborhoods like The Kingsway and Princess-Rosethorn are home to luxury renovation and addition projects where ceiling details, custom bulkheads, and flawless finishing are expected. Markland Wood and Rexdale contribute a significant basement finishing market, with homeowners creating secondary suites and recreation spaces. Humber Bay's continued condo development rounds out a construction environment where our crews stay busy year-round across project types and scales.
For General Contractors
Etobicoke general contractors count on us for production-ready drywall crews that hit schedule milestones. Whether you are building a block of townhouses in Long Branch or managing a luxury renovation in Islington Village, we coordinate around your mechanical and electrical trades and deliver paint-ready walls without delays. We carry $10M liability insurance and full WSIB coverage. Our ability to bundle framing, insulation, and drywall means fewer subcontractors on your site and less coordination overhead.
Why Choose Konstruction Group
- Fire-Rated Assembly Experts – Townhouse party walls, demising walls, and rated ceiling assemblies installed to code and ready for inspection
- Complete Trade Package – Framing, insulation, and drywall under one contract — reducing trades on site and accelerating your schedule
- Level 4 Finish Standard – Three-coat finishing process delivering smooth, uniform, paint-ready surfaces every time
- $10M Liability Insurance – Full commercial liability coverage for projects of any size
- WSIB Compliant – Every worker on your site is covered under WSIB as required by Ontario law
- 1-Year Warranty – Written warranty covering materials and workmanship on every project we complete
Our Process
Pre-Drywall Inspection
We examine every stud bay, ceiling joist line, and header for plumb and level, and confirm that insulation and vapour barriers are properly installed. In Etobicoke's waterfront townhouse developments along Mimico and Long Branch, we coordinate this review with the site manager to verify fire-separation framing details before any board arrives. Rough-in inspection tags for electrical, plumbing, and HVAC are confirmed on the spot.
Typical timeline: 1-2 hoursMaterial Delivery & Layout
We deliver the full material package — panels, joint compound, screws, tape, and trim — timed to our boarding start date. For Etobicoke townhouse blocks where multiple units share a common access road, we stage deliveries so materials are placed directly into each unit and not left blocking the shared driveway or sidewalk. Board types are segregated: Type X for party walls, moisture-resistant for bathrooms and basements, standard for general areas.
Typical timeline: 1 dayBoard Installation
We board ceilings before walls, running panels perpendicular to joists for structural integrity. In Mimico and Long Branch stacked townhouse projects, the fire-rated party wall assemblies between units are completed and left accessible for the building inspector before we close in the adjoining living spaces. For Kingsway and Princess-Rosethorn renovation projects, we take extra care fitting board around existing architectural trim that the homeowner is preserving.
Typical timeline: 3-7 daysFirst Coat (Taping)
Paper tape is embedded in wet compound along each joint, while vinyl or metal bead is installed on all exposed outside corners. Every fastener head is coated flush with the board surface. On Etobicoke renovation projects where new walls meet original plaster or lath construction, we use setting-type compound at transition seams for a harder bond that resists seasonal movement between the two substrates.
Typical timeline: 1-2 daysSecond & Third Coats
Each coat is spread progressively wider — approximately 8 inches on the second and 12 on the third — then feathered to invisible edges. Sanding with 150-grit paper between coats removes ridges and air bubbles. On multi-unit Etobicoke projects along the Mimico-Long Branch corridor, our finishing crew handles entire blocks rather than individual units, maintaining consistent compound thickness and technique from the first townhouse to the last.
Typical timeline: 4-6 daysFinal Inspection & Touch-Ups
A work light held at a shallow angle to the wall reveals any surface flaws that standard room lighting would hide. We correct each deficiency, sand smooth, and verify the fix under the same raking light. In Markland Wood and Rexdale basement finishing projects, we also check that moisture-resistant board transitions are properly sealed before handing the space off. All dust is vacuumed and the area is left clean and ready for the painting contractor.
Typical timeline: 1 dayFrequently Asked Questions
How much does drywall cost for a townhouse in Etobicoke?
Drywall for a typical Etobicoke townhouse (1,500-2,500 square feet) costs $8,000-$18,000 for installation and Level 4 finishing. Fire-rated party walls between units, required by the [Ontario Building Code](https://www.ontario.ca/laws/regulation/120332), add to the cost. We provide detailed, itemized quotes so you know exactly what you are paying for.
Do you work on waterfront condo and townhouse projects in Mimico?
Yes. We have experience with multi-unit residential projects along the Mimico-Long Branch corridor. Our crews handle the production pace required for townhouse blocks and condo fit-outs, including fire-rated assemblies between units.
Can you match the finish quality expected for luxury homes in The Kingsway?
Absolutely. Our Level 4 finishing standard meets the expectations of high-end renovations and custom builds. We pay close attention to ceiling details, bulkheads, and transitions, and we sand under work lights to catch every imperfection before handoff.
How long does drywall take for a basement finish in Etobicoke?
A standard basement (800-1,200 square feet) takes approximately 7-10 working days for complete drywall — boarding, taping, three coats of compound, and final sanding. Larger basements or those requiring fire-rated ceilings may take longer.
Do you handle framing and insulation too, or just drywall?
We offer framing, insulation, and drywall as a complete trade package. Bundling all three under one contract means a single schedule, fewer trades to manage, and a smoother path from framing to paint-ready walls. We also take on drywall-only projects.
Looking for drywall contractor services across the GTA? Visit our main Drywall Contractor Toronto page for comprehensive service information, pricing, and portfolio.
Get a Free Quote
Contact us today for a free consultation and estimate on your project.
Request Quote Online(416) 901-6020Service Areas
Related Searches
Drywall Contractor Services in Other GTA Cities
Drywall Contractor Mississauga
Peel Region
Drywall Contractor Brampton
Peel Region
Drywall Contractor Vaughan
York Region
Drywall Contractor Markham
York Region
Drywall Contractor Oakville
Halton Region
Drywall Contractor Scarborough
City of Toronto
Drywall Contractor North York
City of Toronto
Drywall Contractor Richmond Hill
York Region
Ready to Get Started in Etobicoke?
Contact Konstruction Group today for professional drywall contractor services in Etobicoke and the GTA.
Get a Free Quote